Nfs 2 se ssd11/7/2022 But there are other things you can do to cool down your NVMe too. So we’ve established that you probably need a heatsink for your NVMe SSD if you don’t want it becoming an overheated crispy cracker. The high performance ceiling of these drives makes it difficult to feel the effects of thermal throttling, but prolonged exposure to such high temperatures does not bode well for longevity. The Intel 750 series includes a cable so you can mount the drive in. While it is easy to install and forget about your NVMe SSD, these drives can and will overheat critically even during normal day-to-day use. The U.2 standard allows for bigger SSD capacities and uses your computer's PCIe x4 slot to send all that data back and forth. Motherboard or Aftermarket, You Need a Heatsinkĭo NVMe M.2 SSDs need heatsinks? Our answer would be a resounding YES. This is actually great because, contrary to popular belief, NAND flash performs optimally and is safest at temperatures of 50☌ and upwards, as long as it stays below 70☌, beyond which the data integrity can get compromised. The fact that the NAND flash temperature readings are relatively higher compared to the motherboard heatsink shows that it does a good job of taking heat away from the controller. The heatsink is the slowest to heat up due to its sheer density. 2 2280 Internal SSD Extreme Performance Solid State Drive (SB-ROCKET-NVMe4-1TB) delivers all the advantages of flash disk technology with PCIe Gen4.0 x4. GPU: Gigabyte GeForce RTX 2070 SUPER GAMING OC.CPU Cooler: Cooler Master MasterLiquid ML240R.Here are the specifications of the PC used for the tests: Our test rig is based on the latest Ryzen 2nd Gen (Zen 2 microarchitecture) platform, which shouldn’t cause any performance bottlenecks since the new X570 platform is inherently over-engineered to support the faster PCI-E 4.0 standard. The ambient temperature was maintained at 22☌ for consistency. Idle drive temperatures were recorded prior to the torture tests, followed by maximum temperatures for each run. We subjected the drive to three continuous runs of Crystal Disk Mark 6 per cooling method, each lasting roughly five minutes. The drive was installed in the same high-bandwidth M.2 slot right above the GPU to maintain consistency between runs. We used the Samsung PM981 NVMe SSD in our thermal torture tests.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |